映画『ブレードランナー2049』の発砲用カスタム留ブラ
Tomenosuke Blaster firing model for the "Blade Runner 2049"

ハリウッドのプロップ・レンタル会社 ISS(Independent Studio Services)の発火式ステージ・ガン(ブランクガン)の製作部門を紹介したムービーを、何度も食い入るように見てしまいました。
『ダーティ・ハリー』、『ターミネーター』、『グラン・トリノ』、『ボーダーライン』などで実際に使われたブランクガンとともに、ムービー開始後11分50秒あたりで、本物のチャーターアームズ・ブルドッグをインストールした『ブレードランナー2049』の発砲用ブラスターが登場するのです。



で、留ブラのパーツが全力で応用されているのが分かり、うれしくなってしまったのでした。
グリップ、グリップフレーム、グリップエンド、左右のシリンダーカバーとレーザーサイトを含む周辺部材、マガジンハウジング、トリガーガードなどは、明らかに留ブラです。
レシーバーに関しては留ブラと刻印が異なり、色めから判断するに、実銃シュタイヤー・マンリッヒャー・ライフルのそれが使われているものと思われます。
ISSのガンスミスさんのこだわりなのでしょうか、わざわざ実銃パーツを採用した理由はわかりません。
ボルトハンドルとボルトに関しては、果たして実銃パーツなのか留ブラなのか。
ハンドルを起こして後方に引き、元に戻すアクションカットでは、レシーバーとの相性の良さがうかがえて、これもマンリッヒャーかと思わせるのですが、レシーバーのスリットから覗くフルートの幅は、実銃より若干細く仕上がっている留ブラに限りなく似ているからです。
なんてことを、留ブラの原型師、徳信尊さんと語り合ったり。
じつは『ブレードランナー2049』で使われたウェザリング仕様の留ブラを、徳さんと佐藤加寿彦さんのコラボで再現すべく研究中なのですが、タイミングよく公開されたこのムービーには学ぶところがたくさんあったのでした。
映画『ブレードランナー2049』の発砲用カスタム留ブラ_a0077842_16262496.jpg
映画『ブレードランナー2049』の発砲用カスタム留ブラ_a0077842_16265402.jpg
I watched a video that introduces various movie prop guns that were custom-made by ISS(Independent Studio Services)with interest. Around 11 minutes and 50 seconds into the video, the Firing Blaster, which uses a real Charter Arms Bulldog, from the movie "Blade Runner 2049" appears. I was very happy that many parts from our Tomenosuke Blaster were used.
The grip, the grip frame, the grip end, and peripheral parts, such as the cylinder covers on the left and right and the laser sight, as well as the magazine housing and trigger guard are clearly from the Tomenosuke Blaster.
The receiver has a slightly different engraved mark from the Tomenosuke Blaster. Judging based on the hue, I believe it is from the Steyr Mannlicher Rifle, which is a real firearm. I don't know why parts from actual firearms were used, but this may be a characteristic of the ISS gunsmiths.
I wonder whether the bolt handle and the bolt use parts from actual firearms or the Tomenosuke Blaster. In an action shot where the handle is stood up, pulled backward, and then returned to its original state, they seem to be very compatible with the receiver, which makes me think that this is also from the Mannlicher. However, the width of the flute that can be seen from the slit in the receiver looks just like the Tomenosuke Blaster, which is slightly thinner than an actual firearm.
I was speaking about these sorts of things with Toku-san, who is the model maker for the Tomenosuke Blaster.
The weathered specifications of the Tomenosuke Blaster used in "Blade Runner 2049" is something I am actually researching right now to recreate, so this movie, which was released with good timing, was very helpful.
by tomenosuke_2006 | 2018-08-27 08:13 | 留之助ブラスター
<< DC・アーティスト・アレイに注目 ジョン・ポール・カイザーの5イ... >>