留之助ブラスター2019、東京コミコンで数量限定先行発売 - その3
Tomenlosuke Blaster 2019 @ Tokyo Comic Con - #3

“留ブラ2019”の価格は“留ブラ2049ライセンス・エディション”と同じ定価89,640円(税込)です。
“留ブラ2019”完成記念の豪華オマケは下の画像のとおりです。
詳細につきましては下記をご一読ください。
 留之助ブラスター2019、東京コミコンで数量限定先行発売 - その3_a0077842_02082357.jpg

package design by Jakob Staermose


本製品は『ブレードランナー』(1982年)のアクション・シーン等で使用されたラバー製スタント・モデルが元になっています。実際の発火式ステージ・ガンを型取りして造られたラバー製スタント・モデル(第一世代)のうちの1挺が、さらに型取りされ、レジンでキャストされたモデル(第二世代)を原型に、日本でレジンを使って複製しました。マガジン底面の刻印の潰れやズレ、レバーハンドル先端の気泡痕、フロント・トリガー先端の欠けなどは、関係者の証言によれば、ラバー製第一世代モデル製作時にできたもののようです。スタント・モデルの実際の形状を尊重して、あえて修復はしませんでした。またオリジナルの発火式ステージ・ガン(もしくは留ブラ)より、本製品はおよそ4〜5%収縮していますが、それは第一世代及び第二世代モデル製作時に段階的に発生したものと思われます。今回の複製での収縮比は0.5%以下に抑えれれています。
本製品は“留ブラ2019”発売を記念し、初回生産分300挺限定で製作された非売品です。
本製品の原型となったレジン製第二世代モデル入手の経緯につきましては、下記URLの記事をご参照ください。
https://goo.gl/E32M4Y
 留之助ブラスター2019、東京コミコンで数量限定先行発売 - その3_a0077842_02082611.jpg
This product is based on the rubber stunt model used in the action scenes of a 1982 Hollywood cult SF movie. Of the rubber stunt models made from taking a mold of the firing stage gun (1st generation), a mold was taken from one of them and used to create a resin plastic cast model (2nd generation) that became the prototype for plastic reproductions produced in Japan. The smashed and out of place impression on the bottom of the magazine, air bubble marks on the end of the lever handle, missing piece on the tip of the front trigger, etc., are thought to be from when the 1st generation rubber model was created. We wanted to respect the shape of the actual stunt model, so we did not repair those areas. In addition, this product has shrunk 4% to 5% from the original firing stage gun (or the accurately reproduced Tomenosuke Blaster 2019), and this is thought to have occurred in stages during the creation of the 1st and 2nd generation models. The shrinkage rate was kept to under 0.5% for these reproductions. These reproductions were made as a limited edition to commemorate the introduction of the "Tomenosuke Blaster 2019" and are not for sale.



 留之助ブラスター2019、東京コミコンで数量限定先行発売 - その3_a0077842_21414643.jpg
 留之助ブラスター2019、東京コミコンで数量限定先行発売 - その3_a0077842_21415244.jpg
 留之助ブラスター2019、東京コミコンで数量限定先行発売 - その3_a0077842_21415876.jpg
 留之助ブラスター2019、東京コミコンで数量限定先行発売 - その3_a0077842_21420331.jpg

by tomenosuke_2006 | 2018-11-28 01:34 | 留之助ブラスター
<< 東京コミコン限定T+CPソフビ... モンド・グリーン発売記念Uto... >>