留ブラ2019・スタント・モデル、詳説
Detailed description of the Tomenosuke Blaster 2019 Resin Stunt Model

留ブラ2019・スタント・モデルと留ブラ2049・スタント・モデルの相違点は、それぞれのモデルガン版完成モデルの相違点に準じます。

R-サイド
1. レシーバーのスリーブとスリーブ・スクリューの間にあるスリーブ・カラーの径が1ミリ細くなりました。
2. ボルトハンドルがR-カバーとツライチになりました。
3. レシーバーのスリットから見えるボルト・フルートが前後に3.4ミリ、上下に0.5ミリ拡張しました。
4. グリップの中央部分をおよそ0.5ミリ肉盛りしました。
5. モデルガン版完成モデルのグリップの新造に伴い、グリップ固定用スクリュー・ホールの位置が変わりました。
6. これまで同様、キットにはマイナス・スクリューとウェバースコープ・ノブを同梱、組立済みモデルはこのパーツに限り、接着しないで製品に同梱します。取り付けの際は下の作例画像をご参照ください。
留ブラ2019・スタント・モデル、詳説_a0077842_10112293.jpg
R-side
1. The diameter of the sleeve collar between the receiver's sleeve and the sleeve screw has been made 1mm thinner.
2. The different levels between the bolt handle and R-cover have been evened out.
3. The bolt flute seen from the receiver slit has been expanded by 3.4mm front and back, 0.5mm top and bottom.
4. The center part of the grip has been made thicker by about 0.5mm.
5. According to the new specifications of the assembled model's grip, the location of the screw hole for securing the grip has been changed.
6. Same as before, the kit will be packaged with a slotted screw and Weaver Scope knob.

L-サイド
1. L-カバーの形状が変わりました。
2. シリンダーラッチのマイナス・スクリュー及び、マガジンハウジングの2個のマイナス・スクリューの向きを、2006年のLAコンではじめてデッカード・ブラスターが一般公開された際、カール・テイト氏によって撮影された画像と同じ向きにしました。またレシーバー上部の3点のマイナス・スクリューの向きもテイト氏撮影の画像に従いました。詳しくはこちらのリンクをご参照ください。
3. グリップの中央部分をおよそ0.5ミリ肉盛りしました。
4. グリップ固定用スクリュー・ホールの位置が変わりました。
留ブラ2019・スタント・モデル、詳説_a0077842_10112593.jpg
L-side
1. The shape of the left cover was changed.
2. The orientations of the slotted screw in the cylinder latch, as well as the two slotted screws in the magazine housing, will be the same as the image taken by Mr. Karl Tate at World Con in 2006 when the Deckard Blaster was first displayed publicly. Also, the orientation of the three slotted screws at the top of the receiver will follow the image taken by Mr. Tate. For more details, please visit this link.
3. The center part of the grip has been made thicker by about 0.5mm.
4. According to the new specifications of the assembled model's grip, the location of the screw hole for securing the grip has been changed.

▲ 上の画像はテスト成形品を使った佐藤加寿彦さんによる作例です。販売商品の「スタント・モデル組立済みモデル」ではございません。

▲ The above images are an example by Kazuhiko Sato who used test cast products of the Tomenosuke Blaster 2019 Resin Stunt Model Kit.

ご注文はこちらから→https://goo.gl/BNwJcP
INTERNATIONAL ORDER→http://tomenosuke.bandec-japan.com/
by tomenosuke_2006 | 2019-03-02 12:34 | 留之助ブラスター
<< iBot G3、入荷します 留ブラ2019・スタント・モデ... >>