トーマス・ノスケ・ティファニーブルー・エディション、近日発売
COMING SOON: Thomas Nosuke Tffanyblue Edition
トーマス・ノスケ・ティファニーブルー・エディション、近日発売_a0077842_12310695.jpg

▲ 最初期のデザイン/Early design in 2014

Doktor AからThomas Nosukeと名付けられたソフビ・ロボットのデザイン画が送られてきたのは2014年のはじめ、ちょうど5年前のことでした。
けれど当初お願いしていた原型師さんが仕事半ばにして体調を崩され、なかなか復帰出来ず、いったん計画を白紙に戻すことになりました。
その後しばらくたって原型製作をmirock toyの金子洋平くんにバトンタッチ。
途中、デザインが更新されて、去年7月、やっと原型が完成したのです。
その後はオビツ製作所での蝋型製作から金型製作が順調に進み、12月にはテスト成型にまでたどり着きました。

It was the start of 2014 when the design of a Sofubi robot called Thomas Nosuke was first sent to me by Doktor A. It was exactly five years ago. The person whom I had initially engaged to make the prototype disturbed his health condition and needed some time to fully recover. So I tentatively started the plan over from the beginning.
After that, some time passed before I passed the baton to Youhei Kaneko of mirock toy, and the prototype was completed in July last year. The production at the factory Obitsu also proceeded smoothly, leading to this day.
トーマス・ノスケ・ティファニーブルー・エディション、近日発売_a0077842_11200791.jpg

▲ 金子洋平による原型/Prototype by Yohei Kaneko

トーマス・ノスケ・ティファニーブルー・エディション、近日発売_a0077842_12393205.jpg

▲ オビツ製作所で作られた蝋型/Wax model by Obitsu

Doktor Aの希望もあって、まずは彼の代表的なスチームパンク・ロボット作品、メカトリアンズとはまるで違う、ソフビらしい成型色を採用することにしました。
こうして出来上がったのが、近日発売予定のTIFFANYBLUE エディションを含む3種類のカラーウェイなのです。

We cast the first three colorway including TIFFANYBLUE edition in characteristic of Sofubi, which were absent in past Doktor A' representative Mechtorians.
トーマス・ノスケ・ティファニーブルー・エディション、近日発売_a0077842_22354100.jpg

▲ PANTONE 325C


トーマス・ノスケはぜんぶで10個のパーツで構成されます。
で、6本の足のうち、3本が別パーツとなったのには理由があります。
6本の足が付いた下胴をひとつの金型でキャストするのはソフビ成型上、不可能だったからです。
その結果、3本の足は自在に可動しポーズを変えることができるようになり、不幸中の幸いというか、これがけっこう楽しめるのです。

Thomas Nosuke consists of 10 Sofubi parts in all. There are reasons why three of the six legs became individual parts. It was impossible slush casting the lower torso and six legs with a single mold. As a result, it became possible to change the pose by moving three legs. It is an unexpected effect.
トーマス・ノスケ・ティファニーブルー・エディション、近日発売_a0077842_23562275.jpg

というわけで、トーマス・ノスケの最初の3種類のカラーウェイの発売については、ちょっとユニークな方法でいきます。
詳しくは、また後日。

We will tell you about unique sales information of Thomasu Noske' the first three colorway at a later date. You can look forward to it.
by tomenosuke_2006 | 2019-03-11 13:07 | 留之助オリジナルモチャ
<< 陶磁器製モチャ用石膏原型 クロックワーク・ピノ、今月25... >>